Heavy Duty Lathe Machines

Heavy Duty Lathe Machines


Standard Accessories
  •   Spindle Sleeve
  •   Dead Centre No. 2
  •   Square Tools Post
  •   Thread Dial
  •   Switch Stand
  •   Change Gear Set
  •   Motor Rails and V Pulley

Extra Accessories
  •   Steady and Follow Rest
  •   Face Plate
  •   True and Dog Chuck
  •   Motor and Ele. Fitting
  •   Quick Change Tool Post
  •   Coolant Pump
  •   Rear Tool Post
  •   Taper Turning Attachment
  •   Any Other Special Requirment
Model BH - 10 BH - 12 BH - 15
Bed Width 325 mm 325 mm 375 mm
Height of Center Over Flat Bed Ways 254 mm 304 mm 375 mm
Maximum Swing over bed 490 mm 590 mm 730 mm
Maximum Swing over Cross Slide 290 mm 390 mm 530 mm
Maximum Swing in Gap 800 mm 900 mm 1060 mm
Spindle Nose 6 TPI 6 TPI 6 TPI
Number of Spindle Speed No. 8 Range 30 to 500 RPM 30 to 500 RPM 30 to 500 RPM
Diameter of Hole Through Spindle option in bore size availaible. 54 mm 54 mm 54 mm
Inch Range 2 to 24 T.P.I. 2 to 24 T.P.I. 2 to 24 T.P.I.
Metric Range 1 to 6 mm 1 to 6 mm 1 to 6 mm
Lead Srew Dia. & Pitch 38 mm 4 T.P.I. 38 mm 4 T.P.I. 38 mm 4 T.P.I.
Tail Stock Spindle Dia. 50.8mm (2″) 57mm (2 1/4″) 57mm (2 1/4″)
Tail Stock Spindle Taper Bore MT-4 MT-4 MT-4
Tail Stock Spindle Travel 160 mm 160 mm 170 mm
Power Required 2.2 kw / 3 H.P. 2.2 kw / 3 H.P. 2.2 kw / 5 H.P.

RANGE A.B.C. WEIGHT (APPROX) FLOOR -L SPACE-W OCCUPIED-H
5.5 Feet – 1675 mm 550 mm 1050 kg. 1980 (78″) 1250 (49″) 1370 (54″)
7 Feet – 2130 mm 1000 mm 1250 kg. 2425 (95″) 1250 (49″) 1370 (54″)
9 Feet – 2740 mm 1560 mm 1450 kg. 3050 (120″) 1250 (49″) 1370 (54″)
10 Feet – 3048 mm 1860 mm 1650 kg. 3350 (132″) 1250 (49″) 1370 (54″)
12 Feet – 3658 mm 2450 mm 1875 kg. 3950 (156″) 1250 (49″) 1370 (54″)
14 Feet – 4268 mm 3050 mm 2050 kg. 4570 (180″) 1250 (49″) 1370 (54″)
16 Feet – 4875 mm 3650 mm 2300 kg. 5180 (204″) 1250 (49″) 1370 (54″)