Radial Drilling Machine

Radial Drilling Machine Radial Drilling Machine Radial Drilling Machine
  R40AA R-40G R 40//R25
 
     
     
  Radial Drilling Machine
Radial Drilling Machine
Radial Drilling Machine
Specifications of Radial Drill Machines
DESCRIPTION R40AA R40BA R40G R40 R25
CAPACITY
Drilling in M.S. 40 40 40 40 25
Drilling in C.I. 45 45 45 45 32
Tapping in M.S. 25 20 20 20 12
Boring in M.S. 75 75      
DRILLING HEAD
Spindle hole taper MT -4 MT -4 MT -4 MT -4 MT- 3
Spindle travel 250 250 250 250 175
Spindle Speeds (RPMXsteps) 88-1404X9 88-2600X8 88-1404X9 88-2600X8 105-2651X8
Diameter of RAM 78 78 78 78 72
Spindle Autofeed ranges 0.05&0.09 mm/rev 0.05&0.09 mm/rev Fine Feed Fine Feed Fine Feed
WORKING RANGE
Max. /Min. dist. Spindle nose to base 950/250 850/250 850/250 850/250 860/100
Max. /Min. dist. Spindle centre to column 900.400 920/385 920/385 920/385 640/330
Max. drilling radius 990 1005 1005 1005 705
Machine measurements 1200x780x2100 1350x850x1825 1350x850x1825 1350x850x1825 930x580x1750
Diameter of column 180 170 710 170 130
Work Table 300x300x385 300x300x385 300x300x385 300x300x385 265x200x200
Coolant Tank 640x290x130        
POWER
Drill head Motor 1.5 HP/1440 RPM 1.5 HP/1440 RPM 1.5 HP/1440 RPM 1.5 HP/1440 RPM 1 HP/1440 RPM
Elevating Motor 1 HP/1440 RPM 1 HP/1440 RPM 1 HP/1440 RPM 1 HP/1440 RPM 0.5 HP/1440 RPM
Head Motor V-belt B-33 X 2 B-47 B-33 X 2 B-46/B-47 B-40
Lifting Motor V-belt B-25/B-26 B-25/B-26 B-25/B-26 B-23/B-24 B-22/B-23
 
 
Specifications of DC - 410
DESCRIPTION DC - 410 DESCRIPTION DC - 410
Drilling M.S 42 ( 15/8 ) Max / Min Dist. Spindle nose to base 1225 / 450
Drilling C.I 50 Vertical Travel of Arm 775
Rough Boring in M.S 60 Max / Min Dist. Spindle Center to Column 1025 / 275
Tapping in M.S 25 Horizonatal Travel of Arm 750
Spindle Taper MT-4 Max.Drilling Radius 1137
Spindle Travel 225 Machine Measurement ( L X B X H ) 1600 x 850 x 2270
Spindle Speeds ( RPM x steps ) 12 Steps Diameter of Column 225
  60,90,115,165,200,290,340,480,
575,825,1005,1510
Work Table 550 x 450 x 400
Diameter Of RAM ( quill ) 78 Coolant Tank 770 x 430 x 145 ( 50 Liters )
Spindle Autofeed Ranges 0.1, 0.15, 0.20, 0.27, 0.33, 0.52 Drill-head Motor 2 HP ( 1.5 KW ) 960 / 1440 RPM
    Elevating Motor  ( L X B X H ) 0.75 HP ( 0.56 KW ) 960 RPM
 
 
Specifications of Heavy Duty Radial Drilling Machine
SPECIFICATIONS UNIT RDM 50/1200 RDM 50/1500 RDM 50/1900 RDM 50/2300
CAPACITY
Drilling capacity in steel / C.I. mm 50 / 60 50 / 60 50 / 60 50 / 60
Tapping Capacity          
Metric threads fine pitch mm 48 / 3 48 / 3 48 / 3 48 / 3
Any other threads fine pitch inch 1.750 1.750 1.750 1.750
Light boring capacity in Steel mm 120 120 120 120
DRILL HEAD
Taper in Spindle   MT -5 MT -5 MT -5 MT -5
Number of spindle speeds/range rpm 12 / 40-1700 12 / 40-1700 12 / 40-1700 12 / 40-1700
No. of feed / range mm/rev 6/ 0.12 - 1.25 6/ 0.12 - 1.25 6/ 0.12 - 1.25 6/ 0.12 - 1.25
WORKING RANGE
Drilling radius: Min / Max mm 505/1200 530/1500 530/1890 550/2350
Drill head traverse mm 695 970 1360 1800
Dist. between spindle axis & column face : Min / Max. mm 355/1050 355/1325 355/1715 355/2150
Dist. between base plate & spindle : Max. mm 1420 1425 1425 1645
Dist. between base plate & spindle : Min. (spindle retracted ) mm 695 675 675 705
Spindle Travel mm 325 325 325 325
Diameter of Column mm 300 350 350 400
Arm traverse mm 725 750 750 940
BASE PLATE
Working surface of base plate mm 1300 x 800 1490 x 910 1720 x 910 2300 x 1000
Height of base plate mm 210 210 210 220
Overall size of base plate mm 2000 x 830 2220 x 935 2420 x 925 3100 x 1015
Nominal size of the T slots mm 22 22 22 22
No. of t slots / Spacing no./mm 3 / 250 3 / 250 3 / 250 3 / 250
ELECTRICAL
Power supply A.C. V,ph, Hz 415,3,50 415,3,50 415,3,50 415,3,50
Power of drill head motor Kw. 3.6 / 4.5 3.6 / 4.5 3.6 / 4.5 3.6 / 4.5
Arm elevating Motor Kw. 1.5 1.5 1.5 2.2
DIMENSIONS & WEIGHT
All over length mm 2090 2400 2750 3310
All over Width mm 995 1010 1010 1025
All over Height mm 3100 3150 3150 3400
Dimensions of packing case -- Length mm 2265 2520 3000 3600
Dimensions of packing case -- Width mm 1170 1200 1200 1350
Dimensions of packing case -- Height mm 2795 2800 2800 3200
Net Weight ( approx ) Kg 3200 3500 4000 4600
Gross Weight ( approx ) Kg 4000 4550 5200 5800
 
 
 

Home | Profile | Products | Contact Us | Feedback

Lathe Machine | Lathe Belt Driven Light Duty | Lathe Belt Driven Medium Duty | Lathe Belt Driven Heavy Duty | Lathe All-Geared Type | All Geared Light Duty Lathe | All Geared Medium Duty Lathe | All Geared Heavy Duty Lathe | Automatic Lathes | Capstan Lathes| Drilling Machine | Drilling Pillar Type | Drilling Radial Arm Type | Tapping Machine | Milling Machine | Universal Milling Machines | All Geared Universal Milling Machine | Milling Machine Vertical | Milling Ram Turret Type | Hacksaw Machine | Bandsaw Machine | Horizontal Bandsaw Hinged | Horizontal Bandsaw Double Column | Vertical Bandsaw | Shaping Machine | Slotting Machine | Slotting Machine Light | Slotting Machine Heavy | Power Press | Power Press C-Type | Power Press H-Type | Hydraulic Press C Type | Hydraulic Press H Type | Hydraulic Press H Type Open Frame | Hand Press | Arbor Press | Shearing Machine | Hydraulic Shearing | Mechanical Shearing | Press Brake | Hydraulic Press | Plate Bending Machine | Plate Bending Machine Mechanical | Plate Bending Machine Hydraulic | Grinding Machines | Surface Grinder Manual | Surface Grinder Hydraulic | Cylindrical Grinder | Centerless Grinder | Tool & Cutter Grinder | Extra Heavy Duty Machinery | Accessories | Chuck - True | Chuck - Dog | Quick Change Tool Post | Quick Change Drill Chuck | Vices | Dividing Head | Rotary Table | Compound Slide | Bench Grinder | Pedestal Grinder | Motors | Coolant Pumps | Bench Polishers | Machine Tool Accessories | Attachments | Keyway Attachment For Lathes | Toolpost Grinder | Tapping Attachment | Lathe Spares
Designed by : MID Hosted by : PBD Promoted by : GID